Barker Controls, Inc. - Fiber Optic Amplifiers

Unit of Measure

Items	BF4 BF4 Series Button Adjustment Fiber Optic Amplifier	BF5 BF5 Series Single/Dual Display Fiber Optic Amplifier	BFX BFX Series Dual Display Fiber Optic Amplifier
Description	N/A
Brands	N/A Autonics
Model	N/A BF4	N/A BF5	N/A BFX
Type	N/A Amplifier
Maximum High Response Time	N/A 0.5 ms	N/A	N/A
Response Time	N/A Built-in 2 differential frequencies (frequency 1: ≤ 0.5 ms, frequency 2: ≤ 0.7 ms)	N/A	N/A
Sensitivity Setting	N/A Button/Remote sensitivity setting	N/A	N/A
Operation Mode	N/A Light ON/Dark ON Selectable	N/A	N/A
Indicator	N/A Operation Indicator (Red), Stability Indicator (Green)	N/A	N/A
Current Consumption	N/A ≤ 45 mA	N/A ≤ 50 mA	N/A ≤ 50 mA
Protection Circuit	N/A Reverse power protection circuit, output short overcurrent protection circuit	N/A Reverse power protection circuit, output short over current protection circuit, surge protection circuit	N/A Reverse power protection circuit, output short over current protection circuit, surge protection circuit
Insulation Resistance	N/A ≥ 20 MΩ (500 VDC, Megger)
Dielectric Strength	N/A Between the charging part and the case: 1,000 VAC ~ 50/60 Hz for 1 minute
Display Part	N/A	N/A	N/A Dual Display
Function	N/A	N/A	N/A General Type
Vibration	N/A	N/A 1 mm double amplitude at frequency 10 to 55 Hz in each X, Y, Z direction for 2 hours	N/A 1 mm double amplitude at frequency 10 to 55 Hz in each X, Y, Z direction for 2 hours
Shock	N/A	N/A 500 m/s² (≈ 50 G) in each X, Y, Z direction for 3 times	N/A 500 m/s² (≈ 50 G) in each X, Y, Z direction for 3 times
Ambient Temperature	N/A	N/A -10 to 50 ºC, Storage: -20 to 70 ºC (No Freezing or Condensation)	N/A -10 to 50 ºC, Storage: -20 to 70 ºC (No Freezing or Condensation)
Ambient Humidity	N/A	N/A 35 to 85% RH, Storage: 35 to 85% RH (No freezing or Condensation)	N/A 35 to 85% RH, Storage: 35 to 85% RH (No freezing or Condensation)
Connection	N/A	N/A Connector Cable	N/A Connector Cable
Features	N/A Auto sensitivity setting (button setting) / remote sensitivity setting type External synchronization input, mutual interference protection, self-diagnosis Reverse power protection and output short overcurrent protection circuit Timer function: OFF delay timer approx. 40 ms fixed. (standard type, remote sensitivity setting type only) Automatically selectable Light ON / Dark ON Precise detection of small target and easy to install in the complicated place	N/A Dual-display for light incident level and setting value (BF5-D) Enables to detect the minute object with 1/10,000 high resolution Enables to detect with high-speed moving object (response time 50 ㎲) 5 response times: ultra fast mode (50 µs), fast mode (150 µs), standard mode (500 µs), long distance mode (4 ms), ultra long distance mode (10 ms) Anti-saturation setting function prevents malfunction by saturated light Easy sensitivity setting Long lasting amplifier regardless of element’s life degradation or temperature change Multiple sensitivity setting modes available: auto-tuning, 1-point (maximum sensitivity), 2-point, positioning teaching Up to 8 units enable to connect with mutual interference prevention function using side connectors Auto channel setting function for multiple installations Adopts red, green, blue light sources Slim design with depth 10 mm (W 10 × H 30 × L 70 mm)	N/A Dual-display for light incident level and setting value Enables to detect the minute object with 1/10,000 high resolution Enables to detect with high-speed moving object (response time 50 ㎲) 5 response times: ultra fast mode (50 µs), fast mode (150 µs), standard mode (500 µs), long distance mode (4 ms), ultra long distance mode (10 ms) Anti-saturation setting function prevents malfunction by saturated light External input: emitter OFF, remote sensitivity setting, peak reset, output ON/OFF/Keep, energy saving OFF Multiple sensitivity setting modes available: auto tuning (fine-adjusting sensitivity) teaching sensitivity setting (button or external input auto-tuning, 1-point, 2-point, positioning)