Request Quote
Unit of Measure
Items
AT8PSN/AT8PMN Series Power-Off Delay Analog Timer

AT8PSN/AT8PMN Series Power-Off Delay Analog Timer
AT8SDN Series Star-Delta Analog Timer

AT8SDN Series Star-Delta Analog Timer
ATE8 Series Power ON Delay Analog Timer

ATE8 Series Power ON Delay Analog Timer
ATM Series Analog Timer

ATM Series Analog Timer
ATN Series Analog Timer

ATN Series Analog Timer
Description N/A
Brands N/A Autonics
Model N/A AT8PSN/AT8PMN N/A AT8SDN N/A ATE8 N/A ATM N/A ATN
Type N/A Analog Timer
Function N/A Power-Off Start N/A Star-Delta Timer N/A Power On Delay N/A Power On Delay N/A Multi-Function Timer
Return Time N/A N/A ≤ 100 ms N/A ≤ 200 ms N/A ≤ 100 ms N/A ≤ 100 ms
Time Operation N/A Power-Off Delay N/A Power ON Start N/A Power ON Start N/A Power ON Start N/A
Control Output N/A Relay
Contact Type N/A Time Limit DPDT (2c) N/A Y Contact: Time Limit SPST (1a), Δ Contact: Time Limit SPST (1a) N/A N/A N/A
Contact Capacity N/A 250 VAC ~ 3 A, 30 VDC, 3 A Resistive Load N/A 250 VAC ~ 5 A, 30 VDC, 5 A Resistive Load N/A 250 VAC ~ 3 A, 30 VDC, 3 A Resistive Load N/A 250 VAC ~ 3 A, 24 VDC, 3 A Resistive Load N/A
Width N/A 48 mm N/A 48 mm N/A 48 mm N/A 21.5 mm N/A 48 mm
Height N/A 48 mm N/A 48 mm N/A 48 mm N/A 28 mm N/A 48 mm
Length N/A N/A N/A N/A 59.3 mm N/A
Applications N/A Protect circuit when momentary power failure and start it again N/A Starting large capacity motors N/A N/A N/A
Features N/A
  • Time setting range (AT8PSN: 0.05 to 10 sec, AT8PMN: 0.05 to 10 min)
  • Simple time setup and direct read of time range
  • Power supply : 100 - 120 VAC ~ 50 / 60 Hz / 200 - 240 VAC ~ 50 / 60 Hz / 100/110 VDC / 24 VAC ~ 50 / 60 Hz, 24 VDC
 		N/A
  • Wide range of power supply: 100 - 240 VAC ~ 50 / 60 Hz, 24 - 240 VDC universal
  • Wide range of setting time and switching time
    • T1 (setting time): Selectable 0.5 to 100 sec
    • T2 (switching time): Selectable 0.05, 0.1, 0.2, 0.3, 0.4, 0.5 sec
  • Simple setting time, switching time operation
  • Easy to check output status by LED display
 		N/A
  • DIN W 48 × H 48 mm
  • Easy and simple time setting
  • Cost-effective
  • Easy time setting
  • Wide range of time
  • Power supply: 100 - 240 VAC ~ 50 / 60 Hz, 24 - 240 VDC
 		N/A
  • Miniature Size (W 21. 5 × H 28 × L 59.3 mm)
  • 4c (4PDT) contact (250 VAC~, 3 A)
  • High precise time control
  • Easy time setting using dial
  • Various time ranges: 0.1 sec to 3 hour (11 time ranges, different by models)
  • Power supply ATM4-2: 24 VDC, ATM4-5: 220 VAC ~ 50 / 60 Hz, ATM4-6: 110 VAC ~ 50 / 60 Hz
 		N/A
  • Wide range of power supply: 100 - 240 VAC ~ 50 / 60 Hz, 24 - 240 VD / 24 VAC ~ 50 / 60 Hz, 24 VDC, 12 VDC
  • Various output operation (6 operation modes)
  • Multi time range (16 types of time range)
  • Wide control time (0.05 sec to 100 hour)
  • Easy setting of time, time range, output operation mode
  • Easy to check output status by indicator
  • Do not connect two or more timers with only one input contact or transistor simultaneously.
  • After turning off the power, change the time range, etc.
  • Keep away from high voltage lines or power lines to prevent inductive noise. In case installing power line and input signal line closely, use line filter or varistor at power line and shielded wire at input signal line.
    Do not use near the equipment which generates strong magnetic force or high frequency noise.
  • This unit may be used in the following environments.
    • Indoors (in the environment condition rated in 'Specifications')
    • Altitude max. 2,000 m
    • Pollution degree 2
    • Installation category II