Request Quote
Unit of Measure
Items
Model 25SP Programmable Incremental Shaft Encoder

Model 25SP Programmable Incremental Shaft Encoder
Model 25SP Programmable Incremental Thru-Bore Encoder

Model 25SP Programmable Incremental Thru-Bore Encoder
TRP Tru-TracPro™ Programmable Wheeled Encoder

TRP Tru-TracPro™ Programmable Wheeled Encoder
Description N/A The Model 25SP Programmable Size 25 Accu-CoderPro® shaft encoder is specifically designed for the challenges of an industrial environment. But don't let the tough exterior fool you - contained within the rugged, industrial housing is an advanced set of electronics that allow the encoder to be programmed to your exact application needs. Using EPC's optional programming module, users may select the output type, 32 different waveforms, and any resolution from 1 to 65,536 CPR - that's 262,144 counts using 4x quadrature counting. These programming features allow a single encoder to be configured for multiple applications, enabling one encoder to replace many different part numbers - and that provides cost savings on inventory and down-time replacement. The 25SP can also be configured and shipped with specs pre-programmed, with no on-site programming needed. The Model 25SP Accu-CoderPro™ comes standard with dual bearings rated 80lbs axial or radial, and may be specified with up to IP67 sealing. N/A The Model 58TP programmable 58 mm Accu-CoderPro® thru-bore encoder is specifically designed for the challenges of an industrial environment. Its advanced set of electronics allow the encoder to be programmed to meet your exact application needs. Using EPC's optional programming module, users may select the output type, 32 different waveforms, and any resolution from 1 to 65,536 CPR - 262,144 counts using 4x quadrature counting. These programming features allow a single encoder to be configured for multiple applications, enabling one encoder to replace many different part numbers, providing cost savings on inventory and down-time replacement. The Model 58TP can also be configured and shipped with specs pre-programmed, with no on-site programming needed. N/A
Model N/A 25SP N/A 58TP N/A TRP
Type N/A Encoder
Maximum Shaft Speed N/A 8000 rpm. Higher shaft speeds may be achievable, contact Customer Service. N/A 6000 rpm. Higher shaft speeds may be achievable, contact Customer Service. N/A 6000 rpm. Higher speeds may be achievable - contact Customer Service.
Shaft Material N/A 303 Stainless Steel N/A 303 Stainless Steel N/A Stainless Steel
Shaft Rotation N/A Bi-Directional N/A Bi-Directional N/A
Radial Shaft Load N/A 80 lb max. Rated load of 20 to 40 lb for bearing life of 1.5 x 109 revolutions N/A N/A 5 lb max. Rated load of 2 to 3 lb for bearing life of 1.2 x 1010 revolutions
Axial Shaft Load N/A 80 lb max. Rated load of 20 to 40 lb for bearing life of 1.5 x 109 revolutions N/A N/A 5 lb max. Rated load of 2 to 3 lb for bearing life of 1.2 x 1010 revolutions
Moment of Inertia N/A 5.6 x 10-4 oz-in-sec2 N/A 5.5 x 10-4 oz-in-sec2 N/A
Housing N/A Black Non-Corrosive Finish N/A Black Non-Corrosive Finish N/A Static Dissipative Nylon Composite
Bearings N/A Precision ABEC Ball Bearings N/A N/A
Non-Condensing Relative Humidity N/A N/A 98 % N/A 98 %
Vibration N/A N/A N/A 10 g @ 58 to 500 Hz
Shock N/A N/A N/A 80 g @ 11 ms duration
Common Applications N/A Motion Control Feedback, Conveyors, Elevator Controls, Machine Control, Food Processing, Process Control, Robotics, Material Handling, Textile Machines N/A Motor Control, Conveyors, Elevator Controls, Machine Control, Food Processing, Process Control, Robotics, Material Handling, Textile Machines, and all types of motion feedback. N/A Web Tension Control, Paper Monitoring, Glue Dispensing, Linear Material Monitoring, Cut-to- Length, Conveyor Systems, Ink Jet Printing, Laser Printing, Labeling, Document Handling
Features N/A
  • Industry Standard Size 25 Package (2.5" x 2.5" / 63.5 mm)
  • Fully Programmable with Optional USB Module or Factory Configured
  • Optical Technology for High Accuracy
  • Resolutions from 1 to 65,536 CPR (262,144 quadrature counts)
  • Servo and Flange Mounting
  • IP67 Sealing Available
 		N/A
  • Programmable resolution from 1 to 65,536 CPR
  • Programmable output type and waveform
  • Programmable with USB module or factory configured when ordered
  • 58 mm thru-bore or blind hollow bore
  • Standard and metric bore sizes up to 5/8" and 15 mm
  • Flexible mounting options
  • Sealing to IP67
 		N/A The TRP Tru-TracPro is the programmable upgrade to the TR1 Tru-Trac®. It offers high resolution, user selectable waveforms, and many other features when used with the PR2 Programmer. The identical form factor to the TR1 allows for drop in interchangeability with existing systems.
  • All-in-one field programmable encoder, measuring wheel & spring loaded torsion arm
  • Resolutions from 1-100,000 CPR - no need to change wheel size
  • Customizable waveform output - choose from 40 options
  • Teach index location
  • Field calibration for better performance and accuracy
  • Get up and running quickly with the optional PR2 programmer
  • Spring loaded torsion arm makes wheel pressure adjustments easy
  • Easily installed in a vertical, horizontal or upside down orientation
  • Fast installation for mounting on any surface
  • Reduce cost and inventory with a simplified system design - program as needed
  • Gear option is available when used with an optional rack