Model # BFX, BFX Series Dual Display Fiber Optic Amplifier On Barker Controls, Inc.

Unit of Measure

Technical Specs | Features

Brands	N/A Autonics
Model	N/A BFX
Type	N/A Amplifier
Current Consumption	N/A ≤ 50 mA
Protection Circuit	N/A Reverse power protection circuit, output short over current protection circuit, surge protection circuit
Insulation Resistance	N/A ≥ 20 MΩ (500 VDC, Megger)
Dielectric Strength	N/A Between the charging part and the case: 1,000 VAC ~ 50/60 Hz for 1 minute
Display Part	N/A Dual Display
Function	N/A General Type
Vibration	N/A 1 mm double amplitude at frequency 10 to 55 Hz in each X, Y, Z direction for 2 hours
Shock	N/A 500 m/s² (≈ 50 G) in each X, Y, Z direction for 3 times
Ambient Temperature	N/A -10 to 50 ºC, Storage: -20 to 70 ºC (No Freezing or Condensation)
Ambient Humidity	N/A 35 to 85% RH, Storage: 35 to 85% RH (No freezing or Condensation)
Connection	N/A Connector Cable
Certification	N/A

N/A

Dual-display for light incident level and setting value
Enables to detect the minute object with 1/10,000 high resolution
Enables to detect with high-speed moving object (response time 50 ㎲)
5 response times: ultra fast mode (50 µs), fast mode (150 µs), standard mode (500 µs), long distance mode (4 ms), ultra long distance mode (10 ms)
Anti-saturation setting function prevents malfunction by saturated light
External input: emitter OFF, remote sensitivity setting, peak reset, output ON/OFF/Keep, energy saving OFF
Multiple sensitivity setting modes available: auto tuning (fine-adjusting sensitivity) teaching sensitivity setting (button or external input auto-tuning, 1-point, 2-point, positioning)

Brands