Model # BF5, BF5 Series Single/Dual Display Fiber Optic Amplifier On Barker Controls, Inc.

Unit of Measure

Technical Specs | Features

Brands	N/A Autonics
Model	N/A BF5
Type	N/A Amplifier
Current Consumption	N/A ≤ 50 mA
Protection Circuit	N/A Reverse power protection circuit, output short over current protection circuit, surge protection circuit
Insulation Resistance	N/A ≥ 20 MΩ (500 VDC, Megger)
Dielectric Strength	N/A Between the charging part and the case: 1,000 VAC ~ 50/60 Hz for 1 minute
Vibration	N/A 1 mm double amplitude at frequency 10 to 55 Hz in each X, Y, Z direction for 2 hours
Shock	N/A 500 m/s² (≈ 50 G) in each X, Y, Z direction for 3 times
Ambient Temperature	N/A -10 to 50 ºC, Storage: -20 to 70 ºC (No Freezing or Condensation)
Ambient Humidity	N/A 35 to 85% RH, Storage: 35 to 85% RH (No freezing or Condensation)
Connection	N/A Connector Cable
Certification	N/A

N/A

Dual-display for light incident level and setting value (BF5-D)
Enables to detect the minute object with 1/10,000 high resolution
Enables to detect with high-speed moving object (response time 50 ㎲)
5 response times: ultra fast mode (50 µs), fast mode (150 µs), standard mode (500 µs), long distance mode (4 ms), ultra long distance mode (10 ms)
Anti-saturation setting function prevents malfunction by saturated light
Easy sensitivity setting
Long lasting amplifier regardless of element’s life degradation or temperature change
Multiple sensitivity setting modes available: auto-tuning, 1-point (maximum sensitivity), 2-point, positioning teaching
Up to 8 units enable to connect with mutual interference prevention function using side connectors
Auto channel setting function for multiple installations
Adopts red, green, blue light sources
Slim design with depth 10 mm (W 10 × H 30 × L 70 mm)

Brands