Barker Controls, Inc.
Barker Controls, Inc.
Address: 2205 Old Buncombe Road
Greenville, SC 29609
Phone: 800-845-5274
Fax: 864-242-1134
Email: Sales@BarkerControls.com
Website: www.barkercontrols.com
Print Back
The Tico 734 is suitable for use as a totalizing counter, preset counter, tachometer, timer or position monitor. It has a large backlit 8-digit LCD display and has a remarkably slim construction. Voltage supply is independent of the power supply via an interchangeable lithium cell. There are a total of 10 versions available with a range of different functions but all with the same design.
Unit of Measure

Technical Specs

Brands

 N/A
Hengstler

Display

 N/A Liquid Crystal Display (LCD), 12 mm height, 8 digits for counters

Model

 N/A 734

Type

 N/A Flexible Counter

Display Backlighting

 N/A Whole display area can be backlit with a 10-28 VDC supply,
green-yellow color

High Speed Input

 N/A PNP, ≤ 28 VDC, max. 10 kHz (50 % duty cycle), Low < 1.0 V
High > 2.0 V, impulse > 45 µs, impedance 1 M

Low Speed Input

 N/A NPN, ≤ 28 VDC, max. 30 Hz (50 % duty cycle), Low < 1.0 V
High > 2.0 V, impedance 1 M

Module

 N/A Connection to Input (3)

Low Voltage Option

 N/A 5..30 VAC/DC, 30 Hz, 17 kOhm, with internal connection

Enable Input (5)

 N/A NPN, 28 VDC, level sensitive

Reset Input (4)

 N/A NPN, 28 VDC, edge triggered, maximum 30 Hz (50 % duty cycle)

Panel Cutout

 N/A 33+0.3 mm x 68+0.3 mm, depth behind panel < 29 mm

Maximum Panel Thickness

 N/A 8 mm

Front Panel Rating

 N/A Ingress Protection (IP65)

Internal Power Supply

 N/A Single or dual lithium 3 V battery (CR 1/2 AA), typical life time of 5 years (10 yrs w/2 batteries). "Lo BAT" display flashes approximately 2 weeks prior to end of battery life.

Features

N/A

  • LCD display, 8 digits, 12 mm height, excellent contrast through
  • Backlighting with a 10-28 VDC supply
  • Lithium battery power supply
  • Decimal point, input scaling, count direction, output mode, etc. programmable,
  • depending on model
  • Programming reduced to a minimum for easy handling and set-up
  • Suitable for TTL
  • Mounting depth 29 mm