N/A

• High speed and high accuracy by digital control using high speed CPU
• Various controls
• Phase control, feedback control (constant voltage/constant current/constant power)
• Zero crossing cycle control (fixed/variable cycles)
• Zero crossing ON/OFF control
• Improved maintainability with built-in fast-acting fuse and easy fuse replacement
• Communication output model: RS485 (Modbus RTU)
• Various control inputs and DI inputs
• Control input: analog (current, voltage), ON/OFF (voltage pulse, no voltage), communication (RS485), potentiometer
• DI input: AUTO/MAN switching, RUN/STOP switching, Reset, output holding, SP designation (6 setting points can be customized)
• Various alarm output
• Overcurrent, overvoltage, fuse break, heat sink overheat, device fault, heater break (partial heater break detection), phase loss alarm
• Improved convenience by separating operation part
• Applicable load
• Supercantal, platinum, molybdenum, carbon, halogen lamps, chrome, nickel, etc.
• Since inter element can be damaged when using with coil load, inductive load, etc., the inrush current must be under the rated load current.
• To prevent product malfunction due to noise, wire power, control input, communication, and load cables separately.
• For stable operation, use shield wire for control, alarm, and communication wires. Use a ferrite core on the shield wire to cope with EMC.
• This unit may be used in the following environments.
• Indoors (in the environment condition rated in ‘Specifications’)
• Altitude max. 2,000 m
• Pollution degree 2
• Installation category III